pro X-Bar aluminum handlebar Drag Bar XD1, 1 1/8 inch, black

X-Bar aluminum handlebar by HIGHSIDER pro - 28.6mm Ø at the clamping area / 22.2mm Ø at the grip area

HIGHSIDER pro stands for excellent handlebar quality.
This is due to the company's proprietary selection of materials and material treatment, as well as the manufacturing quality of the handlebars optimized over decades.
X-Bar handlebars impress with double bending stiffness compared to standard handlebars.
The basis for this exceptional stability of the handlebars is the large diameter in the clamping area and the uniform, conical transition to the grip area.
The handlebar flexes less and offers more reserves under extreme loads.

The diameter of the handlebars in the clamping area is 28.6mm and tapers towards the grip tube to 22.2mm.
The wall thickness at the handlebar ends is 4mm (inner Ø 14mm). The surface is matt bead-blasted or high-gloss polished and, depending on the handlebar type, available in up to four anodized colors.

We also offer a version with carbon fiber sheathing.
As already known in the high-tech bicycle sector, HIGHSIDER pro now also offers a variant of the X-Bar handlebar with real carbon fiber sheathing.
Here, the aluminum tube is covered with a carbon fiber sleeve. This sandwich construction achieves an even further reduced weight with the same stiffness of the handlebar.
The manufacturing is absolute precision work. Only in this way can the required tolerances of a motorcycle handlebar be met.
When mounting these handlebars, great care must be taken so that the transparent top layer of the carbon fiber material is not damaged.

The handlebars are supplied without holes for the anti-twist device of the switch fittings.
To best adopt the position of the holes from the standard handlebar, we recommend using a HIGHSIDER pro drilling template.

All HIGHSIDER pro handlebars are supplied with ABE (General Operating Permit).
The range of models is huge and is expanded every year with new entries.
In the ABE, you will reliably find documented which handlebar type fits and is approved for your motorcycle.
As a rule, the assignments in the ABE are without restrictions.
However, there are also exceptions.
For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.
Therefore, look at the entry for your motorcycle in the ABE.
If you do not find your vehicle in the ABE, the ABE can be used as accompanying documentation for an individual inspection.

Scope of delivery: 1 piece

Care instructions:
• For all handlebars and their surface variants, use only acid- and alkali-free cleaners!
• Never clean in direct sunlight and do not let the cleaner dry.
• Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc. Immediately wipe off any drips with a soft cloth.
• Before using cleaning agents, test for compatibility in an inconspicuous area!
• No guarantee or warranty for improper cleaning and care.