per Flat Track steel handlebar, black

HIGHSIDER pro Steel Handlebars - 25.4mm in clamping area / 22.2mm in grip area

HIGHSIDER pro stands for excellent handlebar quality. This is due to the company's own selection of materials and manufacturing quality of the handlebars, which has been optimized over decades.

The handlebars in the 25.4/22.2 version impress with high bending stiffness. The basis for this stability of the handlebars is the larger diameter in the clamping area. The reduction to the grip tube diameter takes place directly in front of the lever fittings.

The diameter of the handlebars is 25.4mm in the clamping area (3mm wall thickness) and 22.2mm in the area of the switch and grip fitting (2mm wall thickness, 18mm inner diameter).
The surface is highly polished and chromed or black KTL-coated.

The handlebars are supplied without holes for the anti-twist device of the switch fittings. To optimally transfer the position of the holes from the standard handlebars, we recommend using the HIGHSIDER pro drilling template.

All HIGHSIDER pro handlebars are supplied with ABE.
The range of models is huge and is expanded every year with new entries.
The ABE reliably documents which handlebar type fits and is approved for the motorcycle.

As a rule, the assignments in the ABE are without conditions.
However, there are also exceptions.
Therefore, check the entry for your motorcycle in the ABE.
If you do not find your vehicle in the ABE, the ABE can be used as a supplementary document for an individual inspection.

Scope of delivery: 1 piece

Care instructions:
• For all handlebars and their surface variants, only use acid- and alkali-free cleaners!
• Never use in direct sunlight and do not let the cleaner dry.
• Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc. Immediately wipe off any dripping amounts with a soft cloth.
• Before using cleaning agents, test compatibility in an inconspicuous area!
• No guarantee or warranty for improper cleaning and care.