for Roadster L01, 1 inch, H-D, 95 mm, chrome-plated

HIGHSIDER pro Steel Handlebars in 1-inch with H-D Dimple

HIGHSIDER pro stands for excellent handlebar quality. This, of course, also applies to the wide and heavy versions of the inch handlebars.

HIGHSIDER pro handlebars are made from high-quality steel with a large wall thickness and are characterized by exceptional dimensional stability and reduced vibration tendency.

In addition to classic shapes, HIGHSIDER pro also offers sporty handlebar variations in 25.4mm.

With a continuous outer diameter of 25.4mm, the wall thickness of the handlebars is 3mm (inner 19.4mm). The surface is highly polished and chrome-plated, or black KTL-coated.

The handlebars are supplied without holes for the anti-rotation device of the switch fittings. To best match the position of the holes from the series handlebar, we recommend using the HIGHSIDER pro drilling template.

For use on Harley models, a version with an indented recess for cable routing (H-D dimple) is offered.

All HIGHSIDER pro handlebars come with an ABE (General Operating Permit).
The range of models is huge and is expanded annually with new entries.
The ABE reliably documents which handlebar type fits and is approved for which motorcycle.

Usually, the assignments in the ABE are without conditions.
However, there are exceptions.
Therefore, please check the entry for your motorcycle in the ABE.
If you cannot find your vehicle in the ABE, the ABE can be used as a supporting document for an individual inspection.

Scope of delivery: 1 piece

Care instructions:
• For all handlebars and their surface variants, only use acid- and alkali-free cleaners!
• Never apply in direct sunlight and do not allow the cleaner to dry.
• Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc.; immediately wipe away any drops with a soft cloth.
• Before using cleaning agents, test compatibility on an inconspicuous area!
• No guarantee or warranty in case of improper cleaning and care.