for 5 3/4 inch LED headlight PECOS TYPE 12, matt black, with DRL, side mount

HIGHSIDER pro 5 3/4 inch LED Headlight PECOS TYPE 12 with DRL, E-approved

The robust, puristically shaped main headlight with a matte black metal housing features a high beam, low beam, parking light, and daytime running light.

The PECOS TYPE 12 stands out with its latest lighting technology and exceptional light design.
The daytime running light provides even greater visibility in road traffic.
A black bezel divides the reflector into an upper and lower half.
The low beam illuminates in the upper half of the reflector, and when the high beam is switched on, the lower half also illuminates.
The parking light forms the outer ring around the reflector.
Its simple design is ideal for classic bikes, roadsters, and custom bikes.

Eye-catching – give your bike an unmistakable style!
The extraordinary design and perfect technology of the HIGHSIDER pro headlight series will definitely make your bike a highlight!

Features:
• Bulb: LED
• Lens: clear
• Housing: matte black metal housing
• Reflector: chrome-plated with DRL and parking light ring
• Mounting point: on the side of the housing

Dimensions:
• Housing-Ø: 165mm
• Inner-Ø of the ring: 136mm
• Overall depth: 135mm (incl. glass)
• Weight: 1250g
• Thread: M8
• Housing depth: approx. 75mm (Measured from the center of the side mounting holes to the back)
• Distance between side mounting points: approx. 160mm

Connections

3-Pin connector:
• Red = Low beam (+)
• White = High beam (+)
• Black = Ground (-)

Separate cables:
• Blue = DRL (+) to ignition plus
• Brown = Parking light (+)

Power consumption:
• Low beam: 17.55W at 13.5V, 1.3A
• High beam: 18.9W at 13.5V, 1.4A
• DRL: 10.8W at 13.5V, 0.8A
• Position light: 1.35W at 13.5V, 0.1A

Scope of delivery: 1 piece

Optional accessories:
• HIGHSIDER pro DRL CONTROL- BOX CB1, daytime running light control box for vehicles without light switch, 12V Item No.: 208-108
• Light switch On/Off with clamp for handlebar mounting e.g. Item No.: 240-044

Note:
If, in conjunction with the HIGHSIDER pro DRL CONTROL- BOX CB1 (208-108), the headlight does not switch to daytime running light after the engine starts, please proceed as follows:
Install the included 120 Ohm resistor as described in the instructions.
The headlight should now switch to daytime running light.