LED Daytime Running Lights with Parking Light Function

HIGHSIDER LED daytime running light

The LED daytime running light with 4 power LEDs and parking light function ensures that bikers are easily noticed by other road users. Housed in a matte black, rectangular aluminum casing, the daytime running light is designed for universal mounting. When switching to low beam, this daytime running light dims to parking light mode, E-approved.

See and be seen – give your bike personality! The extraordinary design and perfect technology of the HIGHSIDER headlight series will definitely make you a striking highlight!

Dimensions:
Width: 150 mm
Height: 38 mm
Depth: 39.5 mm

Technical specifications:
Current consumption at 12.5 volts: max. 0.4 Amperes (corresponds to approx. 5 Watts)
Luminous flux at 12 volts: 250 lumens

Connections:
Black cable: Ground (-)
Red cable = Plus (+), connected to switched plus (ignition).
White cable = connected to the control line of the low beam.

Scope of delivery: 1 piece

Note 1 - with existing light switch:
Operation of the HIGHSIDER LED daytime running light requires a manually switched low beam via a light switch.
The daytime running light must be connected so that it turns off when the main headlight is switched on (exception: operating the headlight flasher). The rear tail light must always remain on, i.e., connected to ignition plus.
Attention: Any other parking lights present on the vehicle must be disconnected, as a maximum of 2 parking lights may be used on the vehicle.

Note 2 - without existing light switch:
The daytime running light can also be used on vehicles without a light switch. For this, for example, the following components are required:
Switch: Art. No. 240-044
HIGHSIDER DRL CONTROL-BOX CB1: Art. No. 208-108 (switches between low beam and daytime running light)