E-Box TYPE 1, for DRL circuit via light sensor

HIGHSIDER PW E-BOX TYPE 1, for DRL circuit via light sensor.

For automatic switching between daytime running lights and low beam. The HIGHSIDER PW E-BOX TYPE 1 detects when it gets dark or bright and then automatically switches on the low beam and at the same time switches off the daytime running light (or vice versa). Additionally equipped (optionally switchable) is the so-called COMING HOME FUNCTION. This allows the daytime running light to remain active for another 30 seconds after the motorcycle is switched off in the dark. No switch is required.

Dimensions:
Height: 16 mm
Width: 56.5 mm
Width with mounting tabs: 75 mm
Length: 48 mm
Mounting tabs: 3 mm x 11 mm (slot)
Weight: 46 g
Cable length: 400 mm
Light sensor cable length: 600 mm (total)

Connections:
Purple/black cable = high beam IN
Yellow/green cable = parking light IN
Black cable = ground IN (-)
Red cable = supply voltage IN (+)
Blue cable = low beam OUT
Black cable = ground OUT (-)
Pink cable = daytime running light OUT (DRL)
Orange cable = low beam IN
Gray cable = programming cable
Green cable = high beam OUT
Brown cable = position light/parking light (OUT)
Black cable = ground OUT (-)
White cable = DRL indicator light OUT

4-pin connector for the light sensor

Scope of delivery: HIGHSIDER PW E-BOX TYPE 1
Cable set
Light sensor
Instructions

Note:
The E-Box is not compatible with HIGHSIDER TYPE 8 headlights with cornering lights.

Tip:
A mounting tutorial is available on YouTube on our channel (HIGHSIDER Tips & Tricks). Link:
https://www.youtube.com/watch?v=OZ8KaqqVC4M